ets5518 環境控制手套箱是為了需要極高可見性、精準度、穩定性的設備及物料而設的，備有一個較大的內部工作區
(13立方英尺，368升)。獨立地維持濕度於 98% 相對濕度及氣溫於 64-135°f
(18-55°c)。用途包括稱重、檢測、貯藏、生物醫學的製備及老化、醫藥、汽車、電子、dod、靜電、大學研究和其他應用。
chamber:
material: fans: 2x110 cfm (6230 l/min),
on/vary/off
3/8” (6mm) clear & white acrylic access ports: (right
side)
construction: 2x?” (6mm) quick disconnects
ps30 polished welded
seams 1x1” (25.4mm) hose barb
doors: 3/8” (9mm) clear acrylic, ?-turn latches
1x1?” (31.4mm) cable pass through
seal: (located on left side)
?” (6mm)
poron, non-setting gasket lighting: 18w sealed fluorescent, on/off sw
gloves:
(when configured) dimensions:
.018” (0.5mm) replaceable hands, natural
rubber, overall: 54”wx25.5”dx22”h (137x65x56cm)
accordion sleeves, 8”
(20.3cm) ports working space (useable): 39”wx20”dx22”h
operating range:
(99x51x56 cm)
humidity: 98% weight: 120 lbs (55 kg)
temp:
(std) 64-135°f (18-55°c), 55°f/12°c (opt)
controllers: operating
systems:
type: 2x cal 9500, multiple ramp/soak cycles dehumidify:
desiccant/pump
1x cal 9500, opt. 3rd parameter, linear input 2.5 lb (1.1kg)
caso4/1.2cfm
resolution: 0.1%/0.1° humidify: ultrasonic
set pt. tracking:
±0.1 capacity: tap water or 5 gal (19 l) ext. tank
rec. out: 0-1vdc, 0-20ma,
4-20ma flow rate – 0.06 cfm (max)
computer if: modbus proto. via rs485- heat:
electric, 500w
pc with w98 or higher, nt cool: 150w thermoelectric (std),
300w (opt)
sensor: power:
type: temp compensated rh/temp voltage:
115/230vac, 50/60hz
rh: capacitive film, 0 to 100%, non-condense current:
8-10 amps
temp: rtd, -40 to +140°f (-40 to 60°c)
accuracy: ±1.5% rh @ 72°f
(22°c) warranty: one (1) yearets 5518 環境控制手套箱是為了需要極高可見性、精準度、穩定性的設備及物料而設的，備有一個較大的內部工作區
(13立方英尺，368升)。獨立地維持濕度於 98% 相對濕度及氣溫於
0-50°c)。用途包括稱重、檢測、貯藏、生物醫學的製備及老化、醫藥、汽車、電子、dod、靜電、大學研究和其他應用。
specifications:
chamber:
dimensions: lighting: 18w sealed
fluorescent, on/off sw
overall: 54”wx25.25”dx21.75”h (137x64x55cm) (light
extends 3” down from top of chamber.)
working space: 38.75”wx24.5”dx21”h
(98x62x53cm) gloves: .018” (0.5mm), replaceable hands,
full clearance:
35.75”wx20”dx18”h natural rubber, accordion sleeves standard
material: 3/8”
(6mm) clear & white acrylic optional: iris ports, no ports
construction:
ps30 polished welded seams fans: 2x110 cfm (6230 l/min), on/off
doors: 3/8”
(9mm) clear acrylic, ?-turn latches ports on right-hand side:
front: 32” x
14” (81 x 35 cm) access opening qty: 2x?” (6mm) quick connect
(dehumidification)
side: 14” x 4” (35 x 10 cm) access opening qty: 1x1”
(25.4mm) hose barb (humidification)
seal: ?” (6mm) poron, non-setting gasket
qty: 1x1” (25.4mm) hose barb (chamber vent)
operating range: qty: 1 brass
quick connect for liquid co2
humidity: 98% @ 23°c ambient port
on left-hand side:
temp: 32 to >122°f (0-50°c) @ 23°c ambient 1x1.5”
(31.4mm) cable pass through
controllers: power:
two (2) cal 3300, single
ramp/soak cycles voltage: 115/230vac, 50/60hz
one (1) cal 3300, optional 3rd
parameter current: 8 amps/4 amps
resolution: 0.1%/0.1° shipping: chamber:
63”x36”x33” 150-lbs.
rec. out: humidity: 0-1vdc (0 to 100% rh) accessories:
22”x22”x14” 27-lbs.
temperature: 0-1vdc (-40 to 60°c) operating
systems:
optional computer interface: dehumidify: desiccant/pump
modbus
pro. via rs485-pc (serial or usb) 1-lb (0.45kg) caso4/0.6cfm
with w98, xp,
w7pro (no function with w7 home) humidify: single head ultrasonic
sensor:
(extends 3” into chamber on right side wall) capacity: 0.9 gal (3.4 l)
type:
temperature compensated rh/temp heat: electric, 500w
rh: capacitive film, 0
to 100%, non-condensing (mounted internally on rear wall of chamber.)
temp:
rtd, -40 to +140°f (-40 to 60°c) cool: liquid co2 to gas (u
理宝商贸（上海）有限公司
13641840935
中国 上海